+371 67 60 73 22 kmmf@kmmf.lv

Rīga, Latvija

Daugavgrīvas iela 116

E-pasts

kmmf@kmmf.lv

Tālrunis:

+371 67 60 73 22

Management system

Management System

Since the establishment of KMM Metals the Board has made a decision to invest time and capital in order to introduce a management system according to ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007 requirements and to ensure a production that meets all requirements of clients as well as to secure environmental protection and safety at the place of work.

In May 2004 after the pre-audit and certification audit by Bureau Veritas Latvia KMM Metals were awarded three certificates that approve that the management system of KMM Metals is developed and maintained in compliance with ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007 requirements.

The scope of supply of the management system is Production of non-ferrous metal alloys wares and semi products, among them machined parts

After the awarding of the certificates employees keep on working on constant improvement of the management system in order to fulfil the aims of the company and to implement the policy of quality, environmental protection and work safety.

  • At the beginning of 2005 KMM Metals recertified the management system accordingly to the new Version of ISO 14001:2004.

  • In June of 2009 KMM Metals recertified the management system accordingly to the new Version of OHSAS 18001:2007.

  • On the 8th of April 2010 KMM Metals recertified the management system accordingly to the new Version of ISO 9001:2008 and prolonged the validity of all certificates till 31st of May 2013

  • On April 15, 2013 “KMM Metals” recertified the management system according to the standards ISO 9001:2008, ISO 14001:2004 and OHSAS 18001:2007 and prolonged validity of all certificates till the 31st of May, 2016.

CERTIFICATES

Certificate: ISO 9001:2008
Scope of supply: Production of non-ferrous metal alloys wares and semi products
Original approval date: 31st of May 2004

Certificate: ISO 14001:2004
Scope of supply: Production of non-ferrous metal alloys wares and semi products
Original approval date: 31st of May 2004s

Certificate: OHSAS 18001:2007
Scope of supply: Production of non-ferrous metal alloys wares and semi products
Original approval date: 31st of May 2004s

Quality control laboratory

QUALITY CONTROL LABORATORY

The aim of the quality control laboratory of KMM Metals is ensuring the quality control of products.

The main task of the laboratory is to control the conformity of the basic quality parameters of the products with the defined technical requirements.

These requirements defined by the client refer to the chemical composition of the product’s material, mechanical properties, geometric sizes and form of articles and the quality of their surface.

The requirements for the chemical composition and mechanical properties of the products comply with the effective European standards or the standards for the complete product of other countries.

The quality control laboratory is involved in all phases of the production – starting at the control of the incoming raw materials till the end control of the packed products at the warehouse of the complete product.

A very important function of the laboratory is the express-analysis and correction of the chemical composition of the hot metal in the melting furnaces during the casting process.

The control methods for quality parameters are being continuously improved and appropriate technical documentation is being prepared by the laboratory.

Furthermore the laboratory controls the technical condition and the metrological parameters of the employed equipment and instruments.

In the laboratory work highly qualified specialists using modern equipment.

For the control of the chemical composition of the hot metal in the melting furnaces there is optical spectrometer of emissions Spectromaxx being used.

The physically-mechanical tests of the bronze alloys’ samples for tensile strength are being performed on the equipment Z100 (Zwick/Roell).

There is also Brinell hardness being tested with a stationary hardness tester.

The laboratory owns a wide range of metal processing and other equipment for preparing of test samples.

The geometrical sizes of the products during the manufacturing process are being controlled with a comfortable measuring instrument with an electronic visualisation of the measuring results.

KMM Metals Quality control laboratory issues Test report type 2.2., according to EN 10204 also upon request of the Client, SIA “KMM Metals” can provide Inspection Certificate type 3.1, according to EN 10204.

AS Krāsaino Metālu Manufaktūra ir noslēdzis 2019. gada 26.martā līgumu Nr, SKV-L-2019/38 ar Latvijas Investīciju un Attīstības Aģentūru par  atbalsta saņemšanu pasākuma “Starptautiskās konkurētspējas veicināšana” ietvaros,  ko līdzfinansē Eiropas Reģionālās attīstības fonds.

Forms

All kinds of molds and semi-finished products can be produced using the continuous casting method.

Read more

Alloys and ingots

12 different alloy types meeting 4 ISO standards.

 

Read more

Purchase of scrap metal

As a manufacturer, we can offer the best prices for scrap metal in Riga.

Read more